How are the parts sized?

Like standard flat-pack furniture: sides go to the floor or stand on legs, the bottom and top sit between the sides (or the top lies on them), the HDF back is nailed on, and fronts overlay the carcass with a small gap. All sizes are worked out for you.

What sheets does the cutting layout use?

Chipboard/MDF sheets of the size you enter (2800 × 2070 mm by default), with the saw kerf and an edge trim. Parts keep the wood grain direction unless you turn that off.

Can I send the cut list to a cutting service?

Yes. Download the parts list as CSV (opens in Excel) or the PDF; both have sizes, quantities and edge banding for every part.

It is saved in this browser automatically. Use “Save project” to keep a file you can open on another computer.

Is anything uploaded?

No. Everything is calculated in your browser.

1200 × 2400 mm · 15 parts · 4 sheets · $312.83Your project is saved in this browser automatically.

Cabinet Designer

Design wardrobes, kitchens and chests: 3D, drawings, cut list, cutting layout and cost.

How to use

1Add units (wardrobe, kitchen units, chest of drawers…) and set their width, height and depth.
2Choose the construction and fronts, then set up the sections: shelves, hanging rail, drawers and doors.
3Check the 3D view and the drawings, the cut list with edge banding, the cutting layout and the cost.
4Download the PDF (drawings, parts, cutting layout, cost) and the parts list for Excel, or save the project to continue later.

FAQ

How are the parts sized?: Like standard flat-pack furniture: sides go to the floor or stand on legs, the bottom and top sit between the sides (or the top lies on them), the HDF back is nailed on, and fronts overlay the carcass with a small gap. All sizes are worked out for you.
What sheets does the cutting layout use?: Chipboard/MDF sheets of the size you enter (2800 × 2070 mm by default), with the saw kerf and an edge trim. Parts keep the wood grain direction unless you turn that off.
Can I send the cut list to a cutting service?: Yes. Download the parts list as CSV (opens in Excel) or the PDF; both have sizes, quantities and edge banding for every part.
Is my project saved?: It is saved in this browser automatically. Use “Save project” to keep a file you can open on another computer.
Is anything uploaded?: No. Everything is calculated in your browser.